- Demineralized water production monitoring

The instrument indicates permanently the resistivity value. The alarm sounds each time the resistivity is lower than the pre-set value; it reset only when the resistivity is back to a greater value. The scale 0 ... 2 MΩ.cm is expanded to allow a comfortable reading from 20 to 500 kΩ.cm with centered value at 100 kΩ.cm bringing a safe information. The instrument is convenient for monitoring demineralisation systems anions / cations , without automatic control.

Associated probes:
Our probes with cell factor 0.1 are suitable (data-sheet 360-01), however the probe BC 1425/BNC - R ¼" is particularly convenient. However the probe BC 1425/BNC - R ¼" is particularly convenient; cable poutput (5 m long) with BNC connector.