An extension terminal (wall, panel mounting or DIN rail mounting):

• Allows a second measurement parameter (pH, flow rate, turbidity, etc.)
• The data from this blind device are displayed on the main device (2nd line display).
• A 4 wires shielded cable is necessary to link both devices (length ≤ 500 m)
• The options RS422 and the data logger are shared between both Bamophox.

The BAMOPHOX 194 is designed for measuring and regulation of various chemicals (free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, peracetic acid) with the use of our amperometric sensors 193 line. It offers a high flexibility on use mixing different built-in programmes for regulation, thresholds, temperature compensation, and alarms. The 2 lines back lighted display, 16 alphanumerical characters, gives an easy measurement and temperature reading in any conditions. It also displays the configuration menu and settings of thresholds, analogical output and operation data modes, calibration steps. To allow a quick and easy diagnostic after configuration a simulation program is built-in with direct actuation on contacts outputs and analogical output. A copy of the signal on the 4-20 mA output is galvanic insulated; it can be set up within the all range of the parameter. Temperature measurement is also available on a 4-20 mA output.