This immersion probe 9337 is convenient for pH or ORP measurements in tank, drain, basin, open channel and when the temperature is important in the process.
Standard construction is of PVC tube diam. 50 mm.

The probe is designed to avoid electrode damaged during calibration. Electrode protection end is removable from the holder. Buffer flask (9011/ 9012/ 9013/ 9015) grips on the holder during the calibration routine. There is no need to hold the probe during these operations.
Probe and flask can stand on floor. The electrode is not removed, no risk to break it.

Associated electrodes for pH and ORP are described on data-sheet 150-01.
Only electrodes with sealing by PG 13.5 thread could be mounted on our probes.

Immersion depth: 200 mm, as a minimum
Temperature sensor: Built-in Pt100 Ohm at 0°C, 3 wires
Length probe: Standard 1 m (from 500 to 3000 mm on request)
Construction: PVC
Head housing: PBT fiber glass reinforced; IP 65
Cable output: Two PG 9
Fitting: Adjustable flange 9358 or PE collar for tube O.D. 50 mm
Operating temperature: 55 °C, as a maximum
Recommended cables: pH, coaxial cable type 9060; Temperature, 3 wire type, shielded, 0.22 mm²