Recherche
MENU Catalog Global Sites
BAMO
INTERNATIONAL
European manufacturer of sensors and instruments for liquids
You are in BAMO EU » General Catalog » Chlorine, disinfection » CL4.2
General Catalog 193-03
CL4.2
CL4.2
Free chlorine sensor, at constant pH
CL4.2
CL4.2

• Water treatment
• pH must be constant
• No tolerance to surfactants
• Temperature 45 °C max.
• Pressure 1 bar max.

APPLICATIONS

Water treatment (for water equivalent to drinkable quality) at a constant pH.

TECHNICAL FEATURES

Measured parameter: Free chlorine
Chlorination additives: Inorganic compounds, such as NaOCl - Ca(OCl)₂ - gaseous chlorine, chlorine produced by electrolysis
Caution: Surfactants not tolerated
Output signal: 4 ... 20mA
Operating temperature 1 to 45 °C
Automatic temperature compensation
Operating pressure 1 bar max. (No vibrations, no pulsating flow)
Flow rate About 30 l/h
pH operating range: Constant between 6 and 8 pH, pH value must be constant
Interferences: Strong incidence of ClO₂ and O₃ on measuring signal; Chlorine produced by electrolysis with a non-diaphragm cell may cause damages.
Zero adjustment: Not necessary (from factory)
Slope calibration:  Only 1 point with BAMOPHAR 194 according to directive DPD-1

Measurement ranges

CL4.2.MA0.5     0.005 …   0.5 mg/l  
CL4.2.MA2        0.005 …   2 mg/l  
CL4.2.MA5        0.05  …    5 mg/l  
CL4.2.MA10      0.05  …  10 mg/l  
CL4.2.MA20      0.05  …  20 mg/l  
CL4.2.MA100    0.5   … 100 mg/l  
CL4.2.MA200    0.5  …  200 mg/l  

General Catalog 193-03
29/06/2018 15:17
Free chlorine sensor, at constant pH
CL4.2
Technical & Commercial support's main contacts
Ask a QUOTATION online
BAMO Mesures SAS
22, Rue de la Voie des Bans
Parc d'activités de la Gare
95100 ARGENTEUIL France
Tel : +33 (0)1 30 25 83 32
Fax : +33 (0)1 34 10 16 05
Email : export@bamo.fr
Site : http://www.bamo.eu
Siret : 314 055 864 000 65
TVA Intra : FR 08 314 055 864
APE : 2651 B
Capital : 400 000 €
Designed and hosted by CARIMEDIA since 1998
© 1998-2024 All rights reserved - Disclaimer