Recherche
MENU Catalog Global Sites
BAMO
INTERNATIONAL
European manufacturer of sensors and instruments for liquids
You are in BAMO EU » General Catalog » Level » NIVAPRESS SGE-25
General Catalog 590-03
NIVAPRESS SGE-25
NIVAPRESS SGE-25
Hydrostatic level transmitter
NIVAPRESS SGE-25
SGE-25

• Measuring ranges up to 500 m H₂O
• Probe: AISI 316 L
• Diaphragm: Hastelloy
• Protection against overloads
• ATEX or DNV certification

APPLICATIONS

Hydrostatic level transmitter NIVAPRESS SGE-25 is convenient for measuring clear liquids, stored in opened tanks and wells.
It is recommended for monitoring and control of submersible pumps.

DESCRIPTION

The NIVAPRESS SGE25 probe is immersed in the liquid. The pressure on the sensor increases proportionally with the depth of immersion.

The pressure is measured at the immersion depth of diaphragm, connected to atmosphere through a capillary inside the cable. The active sensing element is a piezoresistive type isolated by a very strong hastelloy diaphragm. An electronic amplifier operating in connection with the sensor, converts the measurement into a 4-20 mA or 0-10 V analog signal.

The anti-surge circuit protects the instrument from damages caused by atmospheric disturbances or high power devices.

Installation:
The installation of the NIVAPRESS SGE-25 is simplified by the use of a fastening system, such as a suspension clip or/and a BJSC holder. The probe can hang freely at the end of the cable or lie down at the bottom of the tank.

The junction box BJSC with pressure compensation, allows to fix the sensor and ensures the balancing of atmospheric pressure through an integrated vent on the front of the housing. It significantly reduces the risk of entry of dust and moisture. It is also recommended to extend the life of the probe cable.

A cable extension could be done with a standard cable. For large cable distances it is necessary to use the box junction BPS102 (wall mount) with surge protection device.

General Catalog 590-03
08/04/2019 16:27
Hydrostatic level transmitter
NIVAPRESS SGE-25
Technical & Commercial support's main contacts
Ask a QUOTATION online
BAMO Mesures SAS
22, Rue de la Voie des Bans
Parc d'activités de la Gare
95100 ARGENTEUIL France
Tel : +33 (0)1 30 25 83 32
Fax : +33 (0)1 34 10 16 05
Email : export@bamo.fr
Site : http://www.bamo.eu
Siret : 314 055 864 000 65
TVA Intra : FR 08 314 055 864
APE : 2651 B
Capital : 400 000 €
Designed and hosted by CARIMEDIA since 1998
© 1998-2024 All rights reserved - Disclaimer