• 4 models ND 7 to ND 20 • Measuring ranges from 0.09 up to 120 l/min • Wet parts in PFA; Casing in PP • 1 Analogue output 0/4-20 mA • 1 Digital output, to set up
Flow measurements or dosing sequences of aggressive or neutral liquids: - Chemicals strongly alkaline or acidic - CIP (Clean In Place) - Lixiviates, etc.
BAMOFLONIC - PFA applies propagation ultrasonic waves principle to measure the speed of a liquid, then to calculate the corresponding flow-rate. Therefore, it is convenient for liquids electrically conductive or not. Note: The liquid must be homogeneous and clear.
As no moving parts are concerned, BAMOFLONIC operates without mechanical wear. Wet parts are of PFA.
BAMOFLONIC - PFA can operates without its remote display unit. If liquid properties are different to water (viscosity, waves propagation, etc.), it is recommended to use the remote display unit. It allows to display and modify the flow-meter parameters (output signals, reset of totalizer, dosing function, etc.).
24 V DC / 3.6 W
1 Digital output (to set as pulses or empty tube alarm,
reverse flow, dosage, min. or max. flow-rate)
1 Analogue output 0/4-20 mA
For settings and/ or display on remote unit
M12, 5 pins (included)
± 2 % of reading and ± 0.3 mm/s
≤ 0.5 %
0... +60 °C
6 bar at 20 °C
Quick coupling connectors (flare type, see the table)
Body: PFA (Perfluoralkoxy); Casing: PP
To launch a dosage (Connector M12 8 pins)
± 1 % of reading and ± 0.3 mm/s
EC Conformity: The instrument meets the legal requirements of the current European Directives
General Catalog 776-02 17/12/2019 16:52
Ultrasonic flow-meter BAMOFLONIC - PFA
BAMO Mesures SAS
22 Rue de la Voie des Bans Parc d'activités de la Gare
95100 ARGENTEUIL France