To connect cable 9060 type on any pH/ mV-meters or electrodes with head S7 type.
This patented connector allows connection with cables (further on), on site with only a soldering iron thin pane and a wire stripper.

Connection electrode/ pH-meter. Convenient distances from power supply cables and process signals must be respected.

9060: Connection electrode/ pH-meter for distances less than 30 m. Convenient distances from power supply cables and process signals must be respected.

9061: Connection electrode/ pH-meter for distances over 30 m and/or areas where electrical interferences exist. This cable 9061 has a second shield to protect the measuring signal. The second shield (external) must be connected to ground and only on monitor side. Convenient distances from power supply cables and process signals must be respected.

9059: Workshop mounting of any connector 9054, 9050, BNC, etc. on the cable of your choice (Code 160400)

IP 55 case, 2 plugs S7, shielded inside

pH 7 buffer, 100 ml
pH 4 buffer, 100 ml
pH 10 buffer, 100 ml

rH 200 mV solution, 100 ml

KCl electrolyte, 500 ml